Glide Surf Carbon Features
- - -
BASE SYSTEM
GLIDE SURF Carbon comes with the integrated adapter plate and mast in carbon. Thanks to this direct integration of the adapter plate into the mast the whole Foil construction is heavy duty but still light weight.
- - -
Bolts
x18 M8 titanium plated Stainless Steel bolts for maximum strength to weight ratio while preventing any corrosion problems. All using T-40 Torx drive, delivered with the product.
- - -
- - -
- - -
TAIL WING ADJUSTMENT
Delivers inverted thrust to balance the main wing and maintain easy control and stability. The GLIDE SURF CARBON Foil is perfectly trimmed for average weight rider (75- 80kg) with tail in neutral position. Heavier riders, especially in light winds or during the learning process might prefer slightly more stabilizing force that a down tilted rear wing provides. Also, this down-angled position increases low-end power and lift of the foil. At the same time lighter riders, especially in strong wind conditions, may benefit from a drag and lift reduction by reducing the downwards tilt angle of the rear wing. Less down-angle will reduce the differential angle between the two wings and make the foil feel less draggy in the water, resulting in the fastest possible foiling sensation.
- - -
MAST
70,6 cm Carbon mast with improved stiffness due to the carbon fiber construction. The longer mast offers more ability to lean into turns. Optimized structure with two CNC female base system inserts ensuring maximum strength. Hollow construction to reduce weight combined with x3 vertical cross-ribs for maximum stiffness.
- - -
- - -
- - -
FUSELAGE
Perfectly blended wing to CNC machined fuselage connection and integrated wind saddle providing minimum drag. Volume and weight of the aluminium used in fuselage is reduced by eliminating the forward protruding nose.
- - -
WINGS
GLIDE SURF CARBON pre-preg carbon layup with inner foam construction for maximum durability to weight ratio. Front wings span, Large: 86cm / Medium: 75cm and Small: 64cm. Tail wing span, Large: 51cm / Tail wing span, Small: 40cm.
GLIDE wings setup creates a natural tendency to roll into turns maintaining a nice balance during your ride. The Front wing is designed with a pronounced rounded Angle of attack and an elliptical bend shape. While flying, this thick leading edge on the front wing naturally closes the radius of your turn, tightening it. Far back, the angled down tail wings maintain a self-stabilizing roll allowing an easy turning performance. During this momentum, the GLIDE tail wing persists always want to come back to a flat position and cancelling the turning radius.
- - -
- - -
INTERCHANGEABLE WINGS
The glide wind foil can be interchanged with the S, M, L sized wing set.